Dr. Vishal John Mathai
Associate Professor
Date of Joining : 08-08-2016
AICTE Id : 1-3195323047
https://vishaljohnmathai.amaljyothi.ac.in
Membership in
- ASR - Life Time(R216020202)
Areas of Interest
- Advanced Machining processes
- Additive manufacturing
Area of Specialization
- Manufacturing Engineering
Plavelil Shaji Bhavan,
Poomkavu,
Pathanamthitta,
Kozhencerry,
Pathanamthitta - 689646 Kerala
- Ph. D- Manufacturing Engineering - Sardar Vallabhbhai National Institute of Technology (2017)
- M.Tech- Mechanical Engineering - Sardar Vallabhbhai National Institute of Technology (2012)
- B.Tech- Mechanical Engineering - Cochin University of Science And Technology (2008)
- HSE- Science-BioMaths - Kerala State Board (2004)
- Research Fellow and Faculty in S. V. National Institute of Technology, Surat, Gujarat from 2012 to 2016
- Assistant Project Engineer in Simplex Infrastructures Limited from 2008 to 2009
- GATE, 2010
- GATE, 2012
- Patents Published for An Eco-Friendly alternative to conventional plant containers utilizing sustainable materials from Indian Patent Office on the year 2025( )
- Patents Published for 3D Printing Filament from Waste Plastic and Cashew Husk from Indian Patent Office on the year 2025( )
- Analysis and modelling of driller GFRP & CFRP composites using Fuzzy Logic Controllers ,2020, International Journal of Advanced Science and Technology
- End wear compensation during planetary EDM of Ti-6Al-4V by adaptive neuro fuzzy inference system ,2017, Production Engineering: Research & Development
- Analysis of Dimensional Inaccuracies in square cavities generated on Ti-6Al-4V using Planetary EDM ,2017, International Journal of Materials and Product Technology
- Characterization and modelling of tool electrode wear during Planetary EDM of Titanium Grade 5 alloy ,2017, International Journal of Manufacturing Technology and Management
- Effect of process parameters and wall angle on quality and accuracy of features manufactured by SIngle Point Incremental Forming ,2017, Indian Journal of Scientific Research
- Study on effect of Planetary and Diagonal tool actuation strategies on distortion of features machined by EDM process ,2017, Journal of Manufacturing Engineering
- Experimental investigations on EDM of Ti6Al4V with planetary tool actuation ,2016, Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Study on effect of process parameters on overcut and tool wear rate during micro-electro-discharge slotting process ,2016, The International Journal of Advanced Manufacturing Technology
- Study on effect of process parameters on responses during Planetary EDM of Titanium Grade 5 alloy ,2016, International Journal of Modern Manufacturing Technologies
- Investigation on the effect of different tool-workpiece combinations on MRR and TWR during EDM process ,2015, Journal of Machining and Forming Technologies
- Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining proces ,2015, The International Journal of Advanced Manufacturing Technology
- Study on Effect of Tool motion strategies on Tool wear characteristics during Generation of Non-Circular cavities by Electro Discharge Machining process ,2015, International Journal of Machining and Machinability of Materials
- Generation of Square cavity using Planetary EDM ,2014, Advanced Materials Research
- Study of Micro Hole characteristics on Al 1100 during MEDM an Empirical Approach ,2013, International Journal of Advanced Materials Manufacturing and Characterization
- Study on influence of process parameters on feature quality and depth of features produced by Heat Assisted Incremental Forming ,2021, Recent Advances in Manufacturing Processes and Systems
- Investigations on Characteristics of Composites reinforced with Plantain fibres ,2019, Annual International Conference on Emerging Research Areas : Emerging Technologies for Sustainability (AICERA - 2019), Amal Jyothi College of Engineering, Kanjirappally, Kerala, India
- Investigation on the effect of flexural, flammability and acoustic properties on Human Hair reinforced Epoxy composites ,2019, Annual International Conference on Emerging Research Areas : (AICERA - 2019), Amal Jyothi College of Engineering, Kanjirappally, Kerala, India
- Comparative study on effect of cashew nut and saw dust as filler material in r-HDPE based composites ,2019, 2nd International Conference on Sustainable Energy Resources, Materials and Technologies (ISERMAT - 2019)
- Investigation on effect of process parameters on Dimensional Accuracy of features generated by Planetary EDM ,2016, 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016), College of Engineering, Pune, Maharashtra, India
- Study on Effect of Process parameters on End Wear of Tool Electrode during Planetary EDM of Ti-6Al-4V ,2016, 7th International Conference on Material and Manufacturing Technology (ICMMT 2016), Chiang Mai, Thailand
- Electrode Wear Compensation in EDM: An ANFIS Approach ,2016, 6th National Conference on Recent Advances in Manufacturing (RAM 2016), S. V. National Institute of Technology, Surat, Gujarat, India
- Study on Effect of Chemical Etching on Electro Discharge Machined Surface ,2016, 6th National Conference on Recent Advances in Manufacturing (RAM 2016), S. V. National Institute of Technology, Surat, Gujarat, India
- Weld strength modeling in ultrasonic welded parts of Al-Cu using Adaptive Neuro Fuzzy Inference System ,2015, Ninth International Conference on International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 9), Indian Institute of Technology, Powai, Mumbai, India
- Effect of flushing strategies on responses during Planetary EDM of Ti-6Al-4V ,2015, Ninth International Conference on International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 9), Indian Institute of Technology, Powai, Mumbai, India
- Microslot generation by ??-ED Milling ,2015, ModTech International Conference - Modern Technologies in Industrial Engineering IV, Iasi, Romania
- Machining/Processing of Shape Memory Alloys A Review ,2015, 5th National Conference on Recent Advances in Manufacturing (RAM-2015), S. V. National Institute of Technology, Surat, Gujarat, India
- ANFIS Based Prediction Model for Radial Overcut in Micro Holes Generated using Micro Electro Discharge Machining Process ,2015, International Conference on Advances in Materials and Product Design (AMPD 2015), S. V. National Institute of Technology, Surat, Gujarat, India
- Studies on Tool Wear Characteristics in Micro Electro Discharge Slotting Process (??-EDS) ,2014, 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), Indian Institute of Technology, Guwahati, India
- Investigation on the effect of Tool motion strategies in EDM on Surface Quality ,2014, Advances in Materials and Processing Technology Conference (AMPT 2014), Atlantis, The Palm, Dubai, UAE
- Factors Affecting Microturning Process A Review ,2014, 2nd National Conference on Thermal, Fluid and Manufacturing Science (TFMS 2014), C. K. Pithawala College of Engineering and Technology, Surat, Gujarat, India
- Micro Milling Process A Review ,2014, of 2nd National Conference on Thermal, Fluid and Manufacturing Science (TFMS 2014), C. K. Pithawala College of Engineering and Technology, Surat, Gujarat, India
- A study on the effects of machining parameters on surface roughness of a micro milled 3D cavity ,2013, Eight International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 8), National Institute of Technology, Calicut, India
- Study of the effect of cryogenic treatment of tool electrodes during electro discharge machining ,2013, Eight International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 8), National Institute of Technology, Calicut, India
- Study on Micro Hole Accuracy and Electrode Depletion during Micro EDM process through Grey based Taguchi approach ,2013, 3rd International Conference on Production and Industrial Engineering (CPIE 2013), Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India
- Application of Artificial Neural Network for predicting multiple responses during EDM process ,2013, 3rd International Conference on Production and Industrial Engineering (CPIE 2013), Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India
- Analysis of Micro Holes generated during Micro Electro Discharge Machining of Al 1100 using Tungsten Electrode ,2012, 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), Jadavpur University, Kolkata, India
- Investigation on the optimization of machining parameters in EDM using different tool electrode materials ,2012, 3rd National Conference on Recent Advances in Manufacturing, S. V. National Institute of Technology, Surat, Gujarat, India
Book / Chapters Published
| SI# | Title of the book | Publisher | Year | ISBN No |
|---|---|---|---|---|
| 1. | Emerging Technologies for Sustainability |
CRC Press, Taylor and Francis |
2020 |
978-0429353628 |
| SI# | Title of the paper/article | Publisher | Year(dd-mm-yy) | Page (From-To) | ISBN No |
|---|---|---|---|---|---|
| 1. | Wear compensation in Electro Discharge Machining process using Adaptive Neuro Fuzzy Inference System | Elsevier Publishers | 09-10-2025 | 115-132 | 978-0-12-820049-0 |
| 2. | Drilling of Glass Fibre Reinforced Composites | De Gruyter, Germany | 09-10-2025 | 51-67 | 9783110610147 |
| 3. | Micro-EDM with Translational Tool Motion: The Concept of Micro-Electro-Discharge-Slotting | Springer Nature, Singapore | 09-10-2025 | 53-65 | 978-981-13-3074-2 |
Training programs attended
- ADVANCES IN METAL ADDITIVE MANUFACTURING: TODAY, TOMORROW, AND BEYOND, AICTE, National Institute of Technology Calicut, from 2025-01-27 to 2025-02-01
- Workshop on Outcome Based Education, Amal Jyothi College of Engineering, Kottayam, Kerala, Amal Jyothi College of Engineering, Kottayam, Kerala, from 2025-01-16 to 2025-01-16
- 3D Printing for Biomedical Applications: Shaping the Future of Healthcare in Industry 4.0, AICTE, NATIONAL INSTITUTE OF TECHNOLOGY KURUKSHETRA, from 2025-01-13 to 2025-01-18
- 3D Printed Composites: Materials, Technologies, and Applications, AICTE, MAHARSHI KARVE STREE SHIKSHAN SAMSTHA'S CUMMINS COLLEGE OF ENGINEERING FOR WOMEN, Pune, from 2025-01-06 to 2025-01-11
- Integrating AI into Research Workflows: From Concept to Scholarly Publication, Digiref Research Academy, M.P Moothedath Memorial S.N Trusts College, from 2024-12-16 to 2024-12-18
- NEP 2020 Orientation & Sensitization Programme, UGC, Regional Institute of Education, Mysore, from 2024-11-18 to 2024-11-26
- AICTE QIP PG Certificate Programme on 3D Printing, AICTE, IIT Palakkad, from 2024-07-15 to 2024-12-18
- Administrative Training Program OBE-Computation & Attainments and Accreditation Workspace in AES, Amal Jyothi College of Engineering, Amal Jyothi College of Engineering, from 2022-12-12 to 2022-12-16
- Basics and Best practices for Fruitful Research, Amal Jyothi College of Engineering, Amal Jyothi College of Engineering, from 2022-01-10 to 2022-01-14
- Rapid Prototyping and Manufacturing, AICTE & NSS PALAKKAD, NSS PALAKKAD, from 2020-11-23 to 2020-11-28
- 3D Printing & Design, MACE Kothamangalam & AICTE, MACE Kothamangalam, from 2020-11-16 to 2020-11-20
- Administrative Training Program - Moodle LMS Management, Marian College Kuttikkanam (Autonomous), Amal Jyothi College of Engineering, from 2020-07-16 to 2020-08-04
- Emerging Areas in Manufacturing, Vimal Jyothi Engineering, Kannur, Vimal Jyothi Engineering, Kannur, from 2020-05-25 to 2020-05-30
- Emerging Areas in Manufacturing, Vimal Jyothi Engineering College, Kannur, Vimal Jyothi Engineering College, Kannur, from 2020-05-25 to 2020-05-30
- Administrative Training Program Essentials of OBE and NBA / NAAC documentation, Amal Jyothi College of Engineering, Amal Jyothi College of Engineering, from 2019-08-26 to 2019-08-30
- Advanced Mechanical Micromachining Techniques for Miniaturization of Products and Processes, Department of Mechanical Engineering, IIT Madras, from 2019-01-14 to 2019-01-19
- Empowering Educators: A Comprehensive Approach to Mentor- Mentee Schemes, Blooms Taxonomy, and ICT in Teaching, Amal Jyothi College of Engineering, Amal Jyothi College of Engineering, from 2018-12-26 to 2018-12-30
- Fundamentals and Advances in Sheet Metal Forming Technologies: Meeting the Challenge to Higher Competitiveness, Department of Metallurgy and Materials Engineering, Amal Jyothi College of Engineering, Kanjirappally, Kottayam, from 2018-03-08 to 2018-03-09
- Materials Characterization and Quality Control, Department of Metallurgy and Materials Engineering, Amal Jyothi College of Engineering, Kanjirappally, Kottayam, from 2017-10-12 to 2017-10-13
- Do Engineering: Convergence and Employability, Department of Mechanical Engineering, Amal Jyothi College of Engineering, Kanjirappally, Kottayam, from 2017-07-17 to 2017-07-19
- Composites: Design, Synthesis and Modelling, Department of Mechanical Engineering, Amal Jyothi College of Engineering, Kanjirappally, Kottayam, from 2017-01-18 to 2017-01-20
- Design of Experiments (DOE) and Taguchi Methods, Department of Industrial and Production Engineering, Vishwakarma Institute of Technology, Pune, Maharashtra , from 2015-01-19 to 2015-01-21
- Recent Trends and Manufacturing and Quality Engineering, JHDP Palsana and The Institute of Engineers [India], Surat, Gujarat, JHDP Palsana , from 2014-03-01 to 2014-03-02
- Advanced Materials and Machining, Department of Mechanical Engineering, National Institute of Technology, Warangal, Telangana , from 2013-10-31 to 2013-11-02
- Micromanufacturing, Centre for Development of Technical Education, Indian Institute of Technology, Kanpur, Uttar Pradesh , from 2012-11-05 to 2012-11-10
- Business Statistics using SPSS, Department of Business and Industrial Management, G. H. Bhakta Management Academy, VNSGU, Surat, Gujarat , from 2012-03-03 to 2012-03-04
- Developing Soft Skills, Department of Applied Mathematics and Humanities, S. V. National Institute of Technology, Surat, Gujarat , from 2012-01-20 to 2012-01-21
Resource persons in Training programs
- OPTIMIZATION TECHNIQUES IN ENGINEERING RESEARCH & STRATEGIES TO IMPROVE CITATIONS OF RESEARCH PUBLICATIONS, Dept. of Mechanical Engineering, MBCCET, Peermade, Kerala, from 2018-12-18 to 2018-12-20
Funded Projects
- AICTE IDEA LAB, Co-PI, Fund-AICTE, New Delhi and Amal Jyothi College of Engineering, Kanjirappally, from 2021-09-17 to 2023-09-17
- Study on application of Tapioca Starch Slime as a carrier medium for Abrasive Flow Finishing of EDM ed surfaces.., PI, Fund-Research Seed Money (RSM) scheme of APJ Abdul Kalam Technological University (KTU), from 2021-09-02 to 2022-09-02
- DST FIST, Co-PI, Fund-DST, from 2018-12-01 to 2023-12-01
Fellowship/Membership in Professional Bodies/Academies
- Membership, American Society for Research, 05-02-2016
Positions Held
- Pursuing Faculty Co Coordinator - AICTE IDEA Lab, from 17-09-2021, Applied and established AICTE IDEA LAB at Amal Jyothi College of Engineering.
- Department Coordinator - DST FIST, from 19-11-2019, to 18-11-2024, Facilitated the procurement of equipments under DST FIST project to department of Mechanical Engineering
Current Responsibilities
- Pursuing Faculty Co _ Coordinator - AICTE IDEA LAB, from 19-07-2021, Faculty Co _ Coordinator - AICTE IDEA LAB at Amal Jyothi College of Engineering. Project worth Rs. 1.28 Crores with financial support from AICTE, Govt. of India and Amal Jyothi College of Engineering.
- Ph.D. Guide at KTU
Specialized Trainings
- 3D Printing for Biomedical Applications: Shaping the Future of Healthcare in Industry 4.0, NATIONAL INSTITUTE OF TECHNOLOGY KURUKSHETRA, 2025-01-13
- 3D Printed Composites: Materials, Technologies, and Applications, MAHARSHI KARVE STREE SHIKSHAN SAMSTHA'S CUMMINS COLLEGE OF ENGINEERING FOR WOMEN, 2025-01-06
- Integrating AI into Research Workflows: From Concept to Scholarly Publication, MPMM SN TRUST COLLEGE SHORANUR, SHORANUR, 2024-12-16
- NEP 2020 Orientation & Sensitization Programme, Regional Institute of Education, Mysore, 2024-11-18
- AICTE QIP PG Certificate Course on 3D Printing, IIT Palakkad, 2024-07-15
- IDEA Lab Basic Faculty Development Program (Hands on Training), DYPU, Pune, 2021-09-23
- Moodle Site Creation, Amal Jyothi College of Engineering, 2020-07-16
- Online Certification Programme on Industry 4.0, TVS Training and Services Ltd., Chennai, India, 2020-06-22
- Advance Manufacturing Processes, S. V. National Institute of Technology, Surat, Gujarat, 2015-06-08
- Metal Forming, S. V. National Institute of Technology, Surat, Gujarat, 2014-12-22
- Advances in Manufacturing, S. V. National Institute of Technology, Surat, Gujarat, 2014-07-28
- Communication Skills in English for Teachers, S. V. National Institute of Technology, Surat, Gujarat, 2013-11-25
- Fundamentals of Materials Processing, S. V. National Institute of Technology, Surat, Gujarat, 2013-06-10
Dr. Vishal John Mathai
Associate Professor, Mechanical Engineering
Date of Joining : 08-08-2016